Product Description
BTR Stage 2 Truck Cam V2 - BTR31218110
For 1999-2013 GM Gen3/4 LS 4.8, 5.3, 6.0, 6.2
212/218 .553/.553" 111LSA
3 Bolt Pattern
With great power gains throughout the entire RPM range and OEM driving characteristics, this camshaft works well with stock converters. With aftermarket exhaust you'll hear the cam lope at idle while driving smooth like a stock cam.
The Stage 2 grind is a popular choice for those looking to delete DOD/AFM, or just add some pep to your truck's step.
- VVT engines will require a VVT delete kit.
- If installing in an engine originally equipped with a 1-bolt camshaft, a 3-bolt conversion kit will be required.
Our kit options take the guesswork out and include the following:
- Camshaft only: BTR Stage 2 Truck Camshaft by itself.
- Camshaft, Springs and Hat Seals: BTR Stage 2 Truck Cam, high quality beehive springs, OEM style hat valve seals.
- Camshaft, Springs, Hat Seals and Pushrods: BTR Stage 2 Truck Cam, beehive springs, hat seals and 7.400" long, 5/16" Chromoly Pushrods with .080" wall thickness.
- Gasket Kit: Includes Timing cover gasket, water pump gaskets, front crankshaft seal and new damper bolt.
V2 Camshaft Series Advantages:
- Revised Camshaft Centerlines for Increased Average Torque
- Engine Dyno Verified to Produce More Power
- USA Based OEM Tier 1 Supplier - These Camshafts Are Made To LAST.
- Each "Stage" Is Born from Its Own Specific Cam Core. NO GENERIC CORES USED.
- Because Of The Specific Core Per Cam, Maximum Heat Treatment Penetration Is Achieved.
- Made in the USA!
