Product Description
BTR Stage 3 Truck Cam V2 BTR31824100
For 1999-2013 GM Gen3/4 LS 4.8, 5.3, 6.0, 6.2
218/224 .553”/.553” 110LSA
3 Bolt Pattern
The Stage 3 V2 camshaft is an amazing all-around grind for the truck enthusiast.
You sacrifice some low-end torque in the pursuit of more power higher in the RPM range but gain an idle note that is distinctly BTR! It is still a tow-friendly camshaft, just not ideal for the everyday hauler. This camshaft works well with a 2500-3000rpm stall converter.
- VVT engines will require a VVT delete kit.
- If installing in an engine originally equipped with a 1-bolt camshaft, a 3-bolt conversion kit will be required.
Our kit options take the guesswork out and include the following:
- Camshaft only: BTR Stage 3 Truck Camshaft by itself.
- Camshaft, Springs and Hat Seals: BTR Stage 3 Truck Cam, high quality beehive springs, OEM style hat valve seals.
- Camshaft, Springs, Hat Seals and Pushrods: BTR Stage 3 Truck Cam, beehive springs, hat seals and 7.400" long, 5/16" Chromoly Pushrods with .080" wall thickness.
- Gasket Kit: Includes Timing cover gasket, water pump gaskets, front crankshaft seal and new damper bolt
V2 Camshaft Series Advantages:
- Revised Camshaft Centerlines for Increased Average Torque
- Engine Dyno Verified to Produce More Power
- USA Based OEM Tier 1 Supplier - These Camshafts Are Made To LAST.
- Each "Stage" Is Born from Its Own Specific Cam Core. NO GENERIC CORES USED.
- Because Of The Specific Core Per Cam, Maximum Heat Treatment Penetration Is Achieved.
- Made in the USA!
