Product Description
Motion Raceworks Dual Inlet -10 ORB/ -12ORB Single Outlet Fuel Filter w/ integrated mount (10 Micron) 27-175
Designed with the EFI user in mind! This filter allows a dual feed line inlet and single outlet which allows you to easily tie 2 separate pumps into a single feed line and makes routing lines much easier.
The integrated bracket system has a simple two bolt design that makes the filter mounting easy by bolting OR welding. The mounting bracket also allows you to unscrew the other side of the filter to service or replace the filter element without unbolting the bracket and fully removing the filter from the vehicle.
Note: 10 micron is the filtration size that most fuel injector manufacturers call for pre injectors.
Features:
- Dual 10ORB Intlet
- Single 12ORB Outlet
- Integrated mounting bracket for low profile and easy mounting solution.
- Completely Made in the USA.
- Billet Construction
- Integrated
- True 10-micron Microglass Element
- Supports fuel systems over 10gpm.
- Approved for use with Gasoline, Oxygenated, Ethanol and Alcohol Fuels.
- Hard anodized.
*For Racing Use Only*
10-micron replacement element #27-17006: 10 Micron Replacement Fuel Filter Element for Filter PN 12-170 / 12-171 (269motorsports.com)
We recommend replacing the micro glass filter often to reduce the risk of blockage due to the size of the filter pores. These filters are not able to be reused or cleaned unlike the stainless 100 micron. Failure to replace this may cause premature failure and extra stress on fuel pump.
