Product Description
Motion Raceworks 1968-1972 Chevelle GM A-body Lightweight Chromoly Steering Column 15-310
This bolt-in light weight chromoly steering column for a 1968-72 Chevrolet Chevelle is just the answer for saving a considerable amount of weight on your Chevelle. Simply unbolt your column, and bolt this piece back in.
This column has been tested and works great whether you are using a bench seat, bucket seat, or aftermarket race seat.
Uses factory mounts AND hardware for installation. This column comes fully tig welded. Included in Kit-Outer Column-3/4" Inner Shaft-Retaining collar-(2) bushings. (Note: Uses factory nuts/bolts for mounting.)
This column comes standard with a Motion Raceworks 5/6 bolt SFI approved quick release installed and welded.
Steering Box Connections:
Factory Steering Box U-joint connects directly to factory steering boxes and directly to our column using a 36 tooth to 3/4" DD U-joint. Works with power steering AND manual steering boxes. You need to verify the tooth count on your steering box input before ordering, as there are aftermarket boxes you may not be aware that your car has, that could use a different spline count.
NOTE: To connect to a factory steering box (power or manual) you will need the following item:
NOTE: Aftermarket/non-factory steering box may use a different spline count. Please verify spline count if not using the original steering box.
NOTE: To connect to an aftermarket Flaming River / Pinto style rack, you will need the following items:
Steering U-Joint 9/16-26 Spline to 3/4 DD (269motorsports.com)
Steering U-Joint 3/4 Smooth to 3/4 DD 15-50001 (269motorsports.com)
